The stock firmware shared on uploadrom.com helps you to re-install the Mobile Operating System on your Mobile Device. It also allows you to fix your Mobile device if it has any software error issue, IMEI error issue, Bootloop issue, and a mobile dead issue.
Redmi 10 Prime Selene ENG Firmware Engineering Rom COMBINATION Exclusive
Redmi 10 Prime Selene ENG ROM Factory SW NEW
Factory Binary Information
Factory Repair Binary Optimized To
Repair IMEI Erase NV Baseband Corrupted Fix
- Laptop or PC (Running on Microsoft Windows)
- Good quality USB Data Cable
- MediaTek (MTK) USB Drivers
- SP Flash Tool Latest
- Stock ROM for xxxxxx ?
How to Use Flash MTK Firmware ?
- First, you need to download and install MTK (MediaTek) USB drivers.
- Download and extract Stock ROM.
- Download and extract SP Flash Tool and open it.
- Within SP Flashing Tool, locate a Scatter File from the Stock ROM folder.
- Uncheck the preloader partition, and click on the download button.
- Remove and insert the battery again in the phone and connect the USB data cable.
- The flashing process will start. Don’t disconnect the phone during the process, Be patient until a green passing icon appear.
- After flashing, disconnect the USB cable, remove and insert the battery again into phone then power ON and enjoy.
Disclaimer: uploadrom.com is not responsible for any damage caused to your phone. Please backup you phone firmware and important user data before flashing. Your all user data will be erased during flashing procedure. This file is 100% tested by me. Don’t try to flash this file on other phones.